Concealed Stay Roller, No Tail-Zinc

Item: CRS20S

US$57.90
EA (1)

Purpose:
• For doors less than 2-1/4" thick, this roller can roll on the face of the door.
• For doors 2-1/4" or more in thickness use this roller with the #CRSC20 concealed stay roller channel. Ideal for single slide, bi-parting, and by-passing sliding doors where the roller is to be concealed.  Bottom of door must be prepared with a 1-1/2" x 1-1/2" continuous slot to accommodate the concealed stay roller channel.

Function:
A stationary floor mounted stay roller that is mounted at the edge of the opening in the direction the door slides, where the door overlaps the opening.  The door with the #CRSC20 concealed stay roller channel slides over the stay roller. This stay roller can also roll on the face of thinner doors.

Fasteners Included: (1 ea.) 1/2 x 3" Hex Head Lag Screw, Zinc. & Shim Washer.

Documents & Downloads

Documents & Downloads

Technical Data

Technical Data

Purpose:
• For doors less than 2-1/4" thick, this roller can roll on the face of the door.
• For doors 2-1/4" or more in thickness use this roller with the #CRSC20 concealed stay roller channel. Ideal for single slide, bi-parting, and by-passing sliding doors where the roller is to be concealed.  Bottom of door must be prepared with a 1-1/2" x 1-1/2" continuous slot to accommodate the concealed stay roller channel.

Function:
A stationary floor mounted stay roller that is mounted at the edge of the opening in the direction the door slides, where the door overlaps the opening.  The door with the #CRSC20 concealed stay roller channel slides over the stay roller. This stay roller can also roll on the face of thinner doors.

Fasteners Included: (1 ea.) 1/2 x 3" Hex Head Lag Screw, Zinc. & Shim Washer.

Customers who bought this item also bought

To top