A single sliding door that covers an opening.
The typical sliding door will be slightly larger than the opening it is sliding over.

Door Lap:
Is the amount the door overlaps either side of opening. In some cases a door may butt up against a jamb and only overlap on one side of the opening. The size of the door lap is usually dependant on how large the door is and what type of bottom guide is being used.

Standard Door Lap

Door Lap One Side Only

Sliding a Door Beyond the Opening:
Where a door will continue to slide down the wall until it rests at a distance from the opening or in some cases covers another opening. For this type of application a continuous bottom guide is recommended in order to keep the bottom of the door engaged the entire length of travel.


Hardware Options

Box Track

Box track is a top hung system, where the track is mounted over an opening. Door panels are outfitted with hanger assemblies that ride in the enclosed track. The track is attached to the building by brackets. These brackets give the track stability and strength and prevent the enclosed track from opening up over time. The weight of the door is supported only by the track system. A bottom guide/roller is used to stabilize the bottom of the door.

Cleaner Operation: The enclosed box track hardware is typically categorized as your standard barn door hardware. This style of an enclosed track offers a cleaner operation by shielding the track and trolleys from dust and dirt.

Track is available in stock lengths.

Adjustability:  The hanger assemblies (rollers) that attach to the door and ride in the track, offers adjustability to accommodate various door thicknesses. The hanger assembly also allows for limited up/down adjustability for the door, making installation easier.

Door Weight Capacity:  The enclosed box track design offers increased rigidity to the track allowing this type of sliding door hardware to accommodate heavier doors. Modern day enclosed track feature the following capacities:

  • Light duty: 200-400 lb. capacity.
  • Medium duty: 600-800 lb. capacity.
  • Extra Heavy Duty: up to 5,000 lb. capacity

Flat Track

Flat Track is a top hung system, where the track is mounted above the opening. Door panels are outfitted with a pair of hangers that are assembled to specifically suite your door thickness. Only one pair of hangers is recommended per door. These hangers roll quietly on top of the flat track. The track is custom cut to length to suite each opening/application with mounting holes spaced equally or per the customer's designation. The track is offset from the wall/solid blocking using custom length wall spacers and fastened into place by either lag screws or another type of appropriate fastener. The weight of the door is supported only by the flat track system. A bottom guide/roller is used to stabilize the bottom of the door.

Standard Door Weight Capacity:

  • Standard Duty: up to 400 lb capacity per door.
  • Heavy Duty: up to 800 lb capacity per door.

Bottom Rolling Top Guided

Only one pair of bottom roller wheels are required per gate or door.

Bottom rollers are built into the frame of the door or gate and are designed to carry the entire weight of the door rolling on floor track. A top guide system is used to prevent the door from tipping over at the top.

Used for the following applications:

  • The wall or ceiling is not strong enough to support the weight of the door.
  • There is a limited amount of room for hardware at the top of the door.
  • A header does not exist across the top of the opening. Typically true for sliding gate applications.
  • Bottom rolling hardware can support much heavier doors than overhead style box and flat track hardware. Up to 128,000 lb capacity.
To top