click to see enlarged drawing
#CTS Concealed Door Stop (internal to the track)
Frequently used for interior and exterior applications. The concealed track stop is placed inside the track at the desired position were the doors should stop. This product is ideal for bi-parting, telescoping, bi-passing and single sliding door applications. It uses a rubber bumper that strikes the trolley and stops the door quietly. Available for #4, #5, #6, #8, #10, & #25 track.
#572 Stop with optional #102 Bumper Shoe
To protect the corners of wood doors where they come in contact with an end stop. 16 guage steel. 3-1/2" high, 3-1/2" wide. 3/4" lip. Finished: Painted #102 P136, Galvanized #102 P137
#572 End Stop (show with bumper shoe) For sliding doors, any thickness. Height, 2-1/4". Door receiving space: 2" x 2". Malleable iron. Reversible for right or left hand. Adjustable to and from wall. Finish: Painted. Packaged: Boxed, less screws. Weight 1-3/4 lbs. Note: Bottom of wood doors which comes into contact with guides should be protected by steel bumper shoes which must be ordered separately.
#82 Wall Binder
#82 Steel Wall Binder
This product is used when there is no floor (dirt). The binder is attached to the wall and is used to stop the door from rolling out the end of the track in the full open position, and stops the door in the closed position. Steel, 1/4" thick by 2" wide for three thicknesses of doors. Finish: Painted. Packaged: Boxed, less screws. #82 P2 for 1-3/4" thick doors, #82 P5 for 2-1/2" thick doors and #82 P7 for 3" thick doors.
#102 Steel Binder
#102 Steel Binder
Steel, 3/8" thick by 3" wide for doors for 1-3/4" or 2-1/2" thick. Finish: Painted. Packaged: Boxed, less screws. #102 P33 for 1-3/4" thick doors and #102 P34 for 2-1/2" thick doors.
#89 P4 Adjustible Door Binder
#89 P4 Adjustable Door Binder
Adjustable door binder and stop for doors 1-3/4" to 3" thick. Three-piece steel construction, base 3/16" thick, brace 1/8" thick by 1-3/4" wide. End is flared to receive door. May be used at front or back of door. Finish: Painted. Packaged: Boxed, with lag screws. Weight: 1-3/4 lbs each.
Back to Products - Back to Hardware - Home