Steel Plate Doors

NUMBER 972 PLATE		NUMBER 973 PLATE		NUMBER 974 PLATE
One Side		Both Sides		Center Panel
Construction: Mitered door frame is welded at all corners and intersections and ground smooth. Face is welded to frame. All face joints occur over reinforcing members.		Construction: Mitered door frame is welded at all corners and intersections and ground smooth. Face is welded to frame. All face joints occur over reinforcing members. Fiberglass insulation available.		Construction: Mitered door frame is welded at all corners and intersections and ground smooth. Panels are held in place by continuous steel angles.
Thickness:	2 9/16"	Thickness:	2 5/8"	Thickness:	2 1/2"
Frame:	2 1/2" x 2 1/2" x .120" cold formed tube	Frame:	2 1/2" x 2 1/2" x .120" cold formed tube	Frame:	2 1/2" x 2 1/2" x .120" cold formed tube
Face:	milled flat 14 ga galvannealed A60 finish with 1 coat of shop primer paint	Face:	milled flat 14 ga galvannealed A60 finish with 1 coat of shop primer paint	Face:	milled flat 14 ga galvannealed A60 finish with 1 coat of shop primer paint
Weight:	7.2 lbs. per sq. ft.	Weight:	10.2 lbs. per sq. ft.	Weight:	6.4 lbs. per sq. ft.

Series Number 900 Steel Plate Each of the three styles of Number 900 series steel plate doors is custom built to meet your specific application. Designed for straight sliding, slide-fold, swing or vertical lift applications, these doors are constructed of top quality cold formed steel tube and heavy-gage galvannealed steel to assure you of maximum rigidity and long life. All doors receive a coat of rust inhibitive primer before shipment. Sash, louvers and pass doors are available. Glass is not included. Any door can be supplied with pass doors, louvers or sash. Specifications vary depending on door style and applications. Back to Industrial Doors - Back to Products - Home