|
Number 934 Slide-Fold Hardware Sets are to be used on large manually operated or power operated door applications which require the door panels to slide-fold to each jamb leaving a clear opening. The Number 934 slide-fold hardware is available in two sizes for total door weights up to 5,000 lbs. |
| Catalog Number | Maximum Total Weight for a Set of 4 Doors |
| 934 x 10 Hardware | Up to 2,000 lbs. |
| 934 x 25 Hardware | 2,000 Up to 5,000 lbs. |
Hardware sets consists of: Hangers, tracks, brackets, jamb hinges center hinges, back plates, bow handles, center floor guide, top bolts and cane bolts.
Disc Bearing Hinges are recommended for manually operated doors.
Ball Bearing Hinges should be used on all power operated doors and any manually operated doors which will have a high frequency of use.
Note: Top bolts and cane bolts are used on manually operated sets only
Optional Equipment (Extra Cost)
 |
Number 216 Weatherstrip--Neoprene astragals used on the vertical door edges at the center of the door way. Weatherstrip is used along the bottom of the door. |
No. 1028 P320 Cremone Bolt
Cremone bolts can be used in place of cane and spring bolts.
Directions for Ordering:
a. Width and Height of opening.
b. Width, height and thickness of doors.
c. Door and jamb construction
d. Jamb and headroom conditions--Provide sketch or drawing showing available
clearances.
e. Specify if doors are in swing "In" or "Out".
Back to Industrial Doors - Back to Products - Home