Swinging Gate Operators

  Number 1510 Operator Unit
Heavy Duty Gear Unit		 Number 1510XHD Operator Unit
Extra Heavy Duty Gear Unit
  Photos above shown with weather resistant cover removed

OPERATING SPEED* [seconds required to open]
Maximum Gate Width --12'0" Gates Over 12'0"
7 to 8 13 to 14
* Extra Heavy Gear Unit has constant speed of 13 to14 seconds
RECOMMENDED CAPACITIES NUMBER 1510
Operator
[in H.P.]		 Max. Weight of Gate
[in ft]		 Max. Weight of Gate
[in ft]		 Approx. Ship. Weight of Operator
[in lbs.]
- single pairs single pairs single pairs
*1/2 16 ft. 488cm 32 ft. 976cm 600 lbs. 272 kg 1200 lbs. 544kg 275 lbs 125kg 545 lbs. 247kg
*1 26 ft. 792cm 52 ft. 1584cm 1100 lbs. 499kg 2200 lbs. 988kg 310 lbs. 141kg 615 lbs. 279kg
+1 30 ft. 914cm 60 ft. 1828cm 1300 lbs. 590kg 2600 lbs. 1179kg 550 lbs. 249kg 1090 lbs. 494kg
* Heavy Duty Gear Unit
+ Extra Heavy Duty Gear Unit
Standard Voltage: 115V, 230V, single phase. 208V, 230V, 460V 3 phase. 3 Phase current recommended for best all around performance

Number 1510 - Featuring the Harmonic Action Principle The #1510 Aut-o-doR electric gate operator was designed to accept the heavy demands put upon a swing gate operator for either an indoor or outdoor installation. This operator is extremely versatile and is easy and simple to install...it can also be mounted in several ways to meet existing conditions. Normally, it is mounted to an upright channel. (Channels are optional items available in embedded or pad mounted types.) In the event of a power failure the operator is equipped with an emergency release. The 1510 features an extremely smooth operation which is achieved by the harmonic action principle.

A No. 1510 electric operator opens and closes the gate with a simple crank arm and connecting arm movement eliminating the complicated system of levers found in many other gate operating mechanisms. Due to the harmonic action principle of the arms the movement of the gate is started in a gradual manner, the speed becoming quite rapid in the middle of the cycle of operation and then slowing down to a gradual stop. No jerk or slam of gate, means long life for gate and operator. The crank arm is attached directly to the safety clutch of the power unit which adds to its protective function.

A reversing starter with overload and underload protection is provided with each operator.

1510 Specs - Typical 1510 Installation - 1510XHD Specs - Typical 1510XHD Installation - Home