1502-1 Specifications

CROWN MODEL #1502-1 SWING DOOR OPERATOR Automatic Door Operators shall be Model #1502-1 as furnished by Crown Industrial Operators, 213 Michelle Ct., South San Francisco, CA. 94080. Phone ( 650)952-5150. Unit shall provide for both power open - power close with free egress available.

Supply voltage shall be 120 volt AC, single phase. The control circuit will allow for two speed operation with the run and creep speeds independently adjustable.

The operator shall include a 90 volt, DC permanent magnet motor and a right angle worm gear. The motor control shall be accomplished by means of an electronic control package. Unit shall be equipped with an adjustable electric clutch. The motor controls shall be mounted in a remotely located control panel. The operator shall mount above the door on the lintel of the frame on the hinge side of the door (Lintel mounting on the side opposite from the hinge side must be specified). Door connecting arms, door brackets, and bolts shall be included. The operator mounting frame and cover shall be prime coated ready for finish painting in the field.

Back to Products - Home